Co2 Cannon® Basic Co2 Jet

Co2 Cannon® Basic Co2 Jet DMX Switchable remains industry standard when referring to Mounted Co2 Jets. Its simple design and ease of use allows for both DMX and Standard Power on/off capabilities. From Events to small events, private parties to fundraisers, this wholesale Co2 Jet will get the job done.

In stock

SKU cryo-jet-dmx-switchable

Customizable Options:

  $439.00

Description / Co2 Cannon® Basic Co2 Jet

Co2 Cannon® Basic Co2 Jet has a simple design and ease of use allows for both DMX and Standard Power switch on/off capabilities. Compared to a wholesale co2 jet, this is the same functionality. While in DMX mode, can be controlled by a DMX 512 controller utilizing 2 channels; 1 channel of DMX for on/off control and the 2nd channel of DMX for the length of "ON" before the jet automatically shuts off. While in "Standard" mode, this cryo jet can be controlled by any on/off switch to the power supply feeding power to the unit. (Example: power strip on/off button being used to turn the cryo jet on/off when jet is plugged into the power strip and is in Standard mode). This Co2 Jet is lightweight and has the capabilities to be linked to other units for simultaneous control of multiple jets. It comes in 110vAC and 220vAC with ability to be installed on truss or used on floor. Built to withstand rugged conditions, the wholesale co2 jet known as the Co2 Cannon® Basic Co2 Jet reaches heights of 25'-35' feet (7.6-10.6 meters) and weighs only 7.4 Lbs (3.4Kg). With easy assembly, included manual and high pressure Co2 hose, and quick setup time, you will be ready to use this Co2 Jet in minutes, pending you already have Co2. Compatible with both high and low pressure systems. 6 month parts and labor warranty via Co2 Cannon® LLC (Bench Fee Applies to Warranty Claim or Parts Provided for Free). Co2 is not included.

This package comes with the following:

• Co2 Jet unit with attached quick connect fitting and base plate for mounting
• High Pressure Hose with attached quick connect fitting
• Brass fitting (to connect hose to Co2 Tank) (Tank NOT included)
• Power Cable (Attached)
• 3 Pin DMX Cable (15 foot long)
• Manual, Safety Guidelines, and FAQ (Frequently Asked Questions)


The hose and Co2 Jet listed here have quick connect fittings already installed so you can easily disconnect the hose from the Co2 Jet when not in use. Electricity is required for this wholesale co2 jet. Simply connect the hose to the Co2 Jet and the other end of the hose to your Co2 tank. Then connect your DMX cable to the Co2 Jet "In" jack and the other end to any DMX 512 controller, and your ready to go! On this unit, the DMX Switch allows you to turn DMX "on" (to use with DMX 512 controllers) or "off" to use as a standard Cryo Jet (controlled using a power switch where as the on/off ability comes from power being applied to the unit).

This Co2 Jet shoots a 25'-35' foot (7.6-10.6 meters) high stream of Co2 which is about 4'-6' feet wide! These wholesale Co2 Jets are used in stage productions, nightclubs, bars, live performances, concerts, haunted houses, special events and much more. They are similar to a fog machine but do not linger like fog, leave a residue or weird smell, or set off fire alarms. They also significantly cool down an area very quickly. The Co2 dissipates immediately after coming out of the gun so the cloud vanishes in seconds after the user stops activation.

Hose length is customizable. If you desire a custom length hose or have any questions, please contact us:

Email- [email protected]
+1-8-555-CRYOFX
(+1-855-527-9639)

More Information

Weight (kgs) 3.4
Voltage 110 VAC 50/60HZ (220 VAC Available)
Hose Length Pre-Selected or Custom Lengths available
Model Mounted Jet
Length 11 inches (27.9cm)
Height 7 Inches (17.7cm)
Width 5 inches (12.7cm)
Size and Type No
Linkable Yes, via DMX
Power 250 Watts
Range of Motion No
Tank Height No
Tank Width No
Tank Weight No
Tank Color No
Tank Style No
Tank Capacity No
Tank Material No
Tank Valve Outlet Orientation No
Temperature Rating No
LED Count No
LED Color No
LED Wattage No
Reach 25'-35' feet (7.6-10.6 meters)
Nozzle Material ABS
Pressure Rating Up to 1100 psi (75.84 bar)
Warranty 6 Month Parts and Labor from Co2 Cannon® (Bench Fee Applies to Warranty Claim or Parts Provided for Free)
Warranty (Tank) No
Display Product Options In Block after Info Column
Write Your Own Review
You're reviewing: Co2 Cannon® Basic Co2 Jet
loader
Loading...

check-circle You submitted your review for moderation.