CO2 LED Jet

CryoFX CO2 LED Jet is guaranteed to "brighten" up any event. Incorporating 18 individual 3-in-1 LED lights around the base of the nozzle, this DMX controlled CO2 Jet can light up CO2 clouds almost any color, to include; Red, Green, Blue, Yellow, Purple, Cyan, Orange, and White! Instantly light up your clouds of CO2 with vibrant colors to create effects imitating that of 'Fire' (orange or red light) or 'Clouds' (blue or purple light) or simply match the color scheme of your event or venue. CryoFX CO2 LED Jet is designed to have a high light and CO2 output while maintaining low noise output. Controlled by a standard DMX 512 controller, this LED Cryo Jet uses only 2 channels of DMX; 1 channel for on/off of CO2 and 1 channel for on/off/color of lights. Reaching a height of 25'-35' feet (7.6-10.6 meters) and only weighing 30.9 Lbs (14Kg),

CryoFX CO2 LED Jet will give you amazing effects while remaining easy to move. This LED Jet is linkable to other units through XLR DMX Connectors and can be mounted on a truss or used as stand alone on the floor, with about a 120 degree angle adjustment capability. It may be used with high or low pressure CO2 Systems and is available in both 110vAC and 220vAC. LED CO2 Jet also comes with 1 year manufacture warranty from date of purchase. Package comes complete with user manual and High Pressure Co2 Hose so you are ready to use in minutes. CO2 is not included.

Plug and play CO2 LED Cryo Jet, with hose and fittings ready to connect to a CO2 tank. This package comes with the following:

• LED CO2 Jet unit with attached quick connect fitting and base plate for mounting
• High Pressure Co2 Hose with attached quick connect fitting
• CO2 Brass fitting (to connect hose to CO2 Tank) (Tank NOT included)(Fitting specific to purchasers region/country)
• Power Cable
• 3 Pin DMX Cable (15 foot long)
• Manual, Safety Guidelines, and FAQ (Frequently Asked Questions)

The hose and LED CO2 Jet listed here have quick connect fittings already installed so you can easily disconnect the hose from the LED CO2 Jet when not in use. Electricity is required for this package, which connects to any standard wall outlet (specific to users region/country). Simply connect the hose to the LED cryo jet and the other end of the hose to your CO2 tank. Then connect your DMX cable to the LED CO2 Jet "In" jack and the other end to any DMX 512 controller, and your ready to go! On this unit, the DMX control allows you to turn the CO2 Jet on or off (blast the Co2 out) and change the color of the LED lights (for use with DMX 512 controllers). The ideal DMX controller to use with this unit is one with a "Flash" button (button that only send signal when held down), similar to ones used for strobe lights and fog machines. This CO2 Jet shoots a 25'-35' feet (7.6-10.6 meters) high stream which is about 4'-6' wide! These CO2 Jets are used in stage productions, nightclubs, bars, live performances, concerts, haunted houses, special events and much more. They are similar to a fog machine but do not linger like fog or set off smoke alarms. The CO2 dissipates immediately after coming out of the jet so the cloud vanishes seconds after the user stops spraying.

Hose length is customizable. If you desire a custom length hose or have any questions, please contact us:

Email- [email protected]
+1-8-555-CRYOFX
(+1-855-527-9639)